Pinout info?

6 replies [Last post]
Joined: Nov 6 2004

I just gotten this card from Ebay without the breakout box. Anyone here have the pinout info from the PCB so that I can DIY the breakout box?

Joined: Mar 16 2002

Now let me guess........

No sorry, my mind reading isn't working today, how about you give us a clue and tell us what card it is eh? :rolleyes: :confused:


Oh by the way welcome! :D

BSOD - a truly unique Microsoft innovation!

Joined: Nov 6 2004 card i suppose

harlequin's picture
Joined: Aug 16 2000

if it's a then the breakout box doesn't work.

Technical data

Connections: 3 1394/i.LINK/FireWire connections
Audio: 4 channel 32 kHz 12 bit, 2 channel 44.1 kHz 16 bit, 2 channel 48 kHz 16 bit
Compression: DV standard compliant, compression rate 5:1 (25MBit/s.)
Codec: High speed DV software codec from FAST
Operating system compatibility: Windows 98 SE, Windows Me, Windows 2000, or Windows NT 4.0
Resolution: High quality 24-bit True Color (16.7 million colors), PAL (720x576), NTSC (720x480), CCIR601 compliant to DV specification
What's in the box: The PCI busmaster card & I-LINK cable, Installation CD with FAST.forward for lossless transfer of video to PC, Full version of Adobe Premiere 6.0 for nonlinear video editing (CD-ROM), User Manual, Video Pocket Guide with camera tips and tricks from professional videographers and editors
System requirements: PCI slot (V2.1), Pentium II, 400 MHz with MMX, 64 MB RAM (128 MB recommended), Windows 98 SE, Windows Me, Windows 2000, or Windows NT 4.0, CD-ROM Drive, Hard Disk with a minimum data transfer rate of 4 MB/sec, DV device with DV input, Screen resolution of 1024 x 768

if it's a then it will

Gary MacKenzie ( an account only used for forum messages )

Thinkserver TS140 , 750ti Graphics card  & LG 27" uws led backlight , Edius 8

Humax Foxsat HD Pvr / Humax Fox T2 dvbt

Joined: Nov 6 2004

It's a From the pic above, there is a internal connector of 26 pins. I believe it's the same as the external connector which goes to the breakout box.

Joined: Dec 12 2004

I recently purchased the same card, and like you do not have the breakout box. Any luck with obtaining the pin outs to re-create the breakout box?

Joined: Jan 24 2005

I have card and BOB. As to now I was not able to install FastForward drivers. I guess that Mojave and Av have some differents. Mojave can work as DV in/out, analog Pal and Ntsc in and only Ntsc out with special Mojave for Premier plugin. I tried Premier 6 and 6.5